Record Schedule - Samsung SHR-5040 User Manual

reCord sChedule

The details of the record schedule menu are as follows:
recording schedule
00 02 04 06 08 10 12 14 16 18 20 22 24
Continuous
00-01
00-24
You can set the system to automatically record images
by setting the desired time frames.
Press the enter( ) button after moving the cursor on
the camera to be set.
 time selection
In order to select the recording time slot hourly, move
the cursor to the part shown as in the figure below and
press the enter( ) button. And, select the recording
time slot while using the  or  button. You can exit
from the change mode by pressing the enter(
button again.
 rec option
Sets the recording method. Please see the following
table for the types of recording methods.
You can apply the preset recording method for the
selected time slot if the  or  button is used after
pressing the enter(
"00-24": The recording method can be identically set
to a range between zero hour and 24 hours.
If you press "Apply All", the values for the current
channel are copied to entire channels.
34_ menu setup
SHR-5042_Eng_02.indd 34
motion alarm in
reC option
m:C
m:C
apply all
ok
)
00-01
) button.
recording type recording support
No Recording
Continuous
Recording
Motion Recording
Alarm In Recording
C: Continuous
Continuous & Motion
M: Motion
Recording
A: Alarm In Continuous & Alarm
In Recording
Motion & Alarm In
Recording
Continuous & Motion
& Alarm In Recording
BaCkup
The details of the backup menu are as follows:
Backup
Backup mode video (sfX)
start time 2007-04-03 07:41:20
2007-04-03 07:43:20
end time
Backup device usB
Camera
move/Control select
This is to back up the video data stored on the HDD to a
backup device.
 Backup Mode
Selects which mode is to be used for backup. The
backup mode supports three types in total such as
SDB, SFX, and AVI.
Press the enter(
) button and select the backup
mode by using the  or  button. You can exit from
the change mode by pressing the enter(
again.
samsung database (sdB): This is a proprietary data
type of Samsung. Once data is backed up in SDB, the
backup data are automatically copied into the SDB
Viewer as well as the SDB. Typically, the SDB is used
to back up mass storage data.
sFX: This mode runs a backup job together with
the auto-executable video player. If the backup file is
executed, the player will be automatically launched to
play the video. The SFX backup data is saved with an
executable file extension (.EXE).
Avi: This mode saves in the video format that can be
played from the Windows Media Player.
 start time & end time
Sets the date and time for backup.
setup
screen
symbol
NONE
C
M
A
C : M
C : A
M : A
C : M : A
ok Cancel
exit
) button
2008-01-25 오전 9:31:27