Samsung SHR-5040 User Manual page 55

2. too LBAr area:
You can directly execute several functions or
applications.
When listed from left to right, the tools are Connect/
Disconnect, Search Viewer, Setup Tool, Save
Snapshot, Print Snapshot, Add a Bookmark, Remove
the Selected Tile, Start Recording on All Tiles, Stop
Recording on All Tiles, and Alarm Indicator.
3. c AMerA tree area:
You can see the logical view tree, which displays the
assigned cameras, layouts, and sites.
4. c AMerA controLs area:
Using the controls, you can handle the videos
displayed in the VIEWING area.
5. viewing area:
Through the tiles in a layout, you can monitor images
from multiple cameras. A layout can permit up to 16
cameras simultaneously in this area. With a dualscreen
configuration, you can view maximum 32 cameras.
The screen aspect ratio of each tile follows the ratio of
the original source.
6. M essAge area:
Events received from remote devices and system log
messages are displayed in this areas.
But you can also enable or disable the display of
four areas (CAMERA TREE, CAMERA CONTROLS,
MESSAGE, TOOLBAR areas) using the options on View
menu.
For instance, once the camera tree window is
unchecked, the CAMERA TREE area will disappear.
Using the Full screen function, you can expand the
application window size to full screen.
 Audio may become unstable depending on the
bandwidth usage when transferring audio data
over a network in Net I.
SHR-5042_Eng_02.indd 51
Using layouts
The CAMERA TREE area displays the logical view tree,
which contains the cameras, layouts, and sites that have
been created through the Setup Tool application.
Each displayed entity shows a number next to the
entity name. The number is used to separate tiles in the
VIEWING area. When a tile is active, it is displayed in
orange.
To place multiple layouts in the VIEWING area,
doubleclick each layout in the CAMERA TREE area. Or
you can drag the wanted layout in the CAMERA TREE
area and drop it in the VIEWING area.
The created layouts have no predefined patterns.
You have to assign patterns to each layout according to
the assigned number of cameras and maps. The default
layout pattern is given a 2 x 2 pattern.
appendix _51
2008-01-25 오전 9:31:39