Snmpv3 Target Address Table Information; Snmpv3 Target Parameters Table Information - NEC N8406-022A Reference Manual

Table 22 SNMPv3 Community Table parameters
Field
Name
User Name
Tag

SNMPv3 Target Address Table information

Command: /info/sys/snmpv3/taddr
Name
---------- --------------- ---- ---------- ---------------
trap1
This command displays the SNMPv3 target address table information, which is stored in the SNMP engine.
The following table describes the SNMPv3 Target Address Table information.
Table 23 SNMPv3 Target Address Table parameters
Field
Name
Transport Addr
Port
Taglist
Params

SNMPv3 Target Parameters Table information

Command: /info/sys/snmpv3/tparam
Name
------------------- -------- -------------------- --------- -----------
v1v2param
The following table describes the SNMPv3 Target Parameters Table information.
Table 24 SNMPv3 Target Parameters Table
Field
Name
MP Model
User Name
Sec Model
Sec Level
Description
Displays the community string, which represents the configuration.
Displays the User Security Model (USM) user name.
Displays the community tag. This tag specifies a set of transport endpoints from which a
command responder application accepts management requests and to which a command
responder application sends an SNMP trap.
Transport Addr Port Taglist
47.81.25.66 162
Description
Displays the locally arbitrary, but unique identifier associated with this
snmpTargetAddrEntry.
Displays the transport addresses.
Displays the SNMP UDP port number.
This column contains a list of tag values which are used to select target addresses for a
particular SNMP message.
The value of this object identifies an entry in the snmpTargetParamsTable. The identified
entry contains SNMP parameters to be used when generating messages to be sent to this
transport address.
MP Model User Name
snmpv2c v1v2only
Description
Displays the locally arbitrary, but unique identifier associated with this
snmpTargeParamsEntry.
Displays the Message Processing Model used when generating SNMP messages using
this entry.
Displays the securityName, which identifies the entry on whose behalf SNMP messages
will be generated using this entry.
Displays the security model used when generating SNMP messages using this entry. The
system may choose to return an inconsistentValue error if an attempt is made to set this
variable to a value for a security model which the system does not support.
Displays the level of security used when generating SNMP messages using this entry.
Params
v1v2trap v1v2param
Sec Model Sec Level
snmpv1 noAuthNoPriv
Command Line Interface 35