Snmpv2 Trap Host Configuration; Snmpv3 Trap Host Configuration - NEC INTELLIGENT L2 SWITCH N8406-022A Application Manual

SNMPv2 trap host configuration

The SNMPv2 trap host configuration is similar to the SNMPv1 trap host configuration. Wherever you specify the
model you need to specify snmpv2 instead of snmpv1.
c/sys/ssnmp/snmpv3/usm 10
/c/sys/ssnmp/snmpv3/access 10
/c/sys/ssnmp/snmpv3/group 10
/c/sys/ssnmp/snmpv3/taddr 10
/c/sys/ssnmp/snmpv3/tparam 10
/c/sys/ssnmp/snmpv3/notify 10
/c/sys/ssnmp/snmpv3/comm 10

SNMPv3 trap host configuration

To configure a user for SNMPv3 traps you can choose to send the traps with both privacy and authentication, with
authentication only, or without privacy or authentication.
This is configured in the access table using the command: /c/sys/ssnmp/snmpv3/access <x>/level, and
/c/sys/ssnmp/snmpv3/tparam <x>. The user in the user table should be configured accordingly.
It is not necessary to configure the community table for SNMPv3 traps because the community string is not used by
SNMPv3.
The following example shows how to configure a SNMPv3 user v3trap with authentication only:
/c/sys/ssnmp/snmpv3/usm 11
/c/sys/ssnmp/snmpv3/access 11
/c/sys/ssnmp/snmpv3/group 11
/c/sys/ssnmp/snmpv3/taddr 11
/c/sys/ssnmp/snmpv3/tparam 11
/c/sys/ssnmp/snmpv3/notify 11
For more information on using SNMP, see the Command Reference Guide.
name "v2trap"
name "v2trap"
model snmpv2
nview "iso"
model snmpv2
uname v2trap
gname v2trap
name v2trap
addr 47.81.25.66
taglist v2trap
pname v2param
name v2param
mpmodel snmpv2c
uname v2trap
model snmpv2
name v2trap
tag v2trap
index v2trap
name public
uname v2trap
name "v3trap"
auth md5
authpw v3trap
name "v3trap"
level authNoPriv
nview "iso"
uname v3trap
gname v3trap
name v3trap
addr 47.81.25.66
taglist v3trap
pname v3param
name v3param
uname v3trap
level authNoPriv
name v3trap
tag v3trap
Accessing the switch 13