Table of Contents
Advertisement
Maintenance Menu
Introduction
The Maintenance Menu is used for debugging purposes, enabling you to generate a technical support dump of the
critical state information in the switch, and to clear entries in the Forwarding Database and the Address Resolution
Protocol (ARP). This menu is available only from an administrator and operator login.
Menu information
Command: /maint
[Maintenance Menu]
The following table describes the Maintenance Menu options.
Table 85 Maintenance Menu options
Command
sys
fdb
debug
arp
igmp
uudmp
ptdmp
cldmp
tsdmp
pttsdmp
System maintenance options
Command: /maint/sys
[System Maintenance Menu]
The System Maintenance Menu is reserved for use by NEC technical support. The options are used to perform
system debugging.
The following table describes the System Maintenance Menu options.
Table 86 System Maintenance Menu options
Command
flags <new NVRAM flags word as
0xXXXXXXXX>
sys
- System Maintenance Menu
fdb
- Forwarding Database Manipulation Menu
debug
- Debugging Menu
arp
- ARP Cache Manipulation Menu
igmp
- IGMP Multicast Group Menu
uudmp
- Uuencode FLASH dump
ptdmp
- tftp put FLASH dump to tftp server
cldmp
- Clear FLASH dump
tsdmp
- Tech support dump
pttsdmp - tftp put tech support dump to tftp server
Usage
Displays the System Maintenance Menu.
Displays the Forwarding Database Manipulation Menu.
Displays the Debug Menu.
Displays the ARP Cache Manipulation Menu.
Displays the IGMP Maintenance Menu.
Displays dump information in uuencoded format.
Saves the system dump information via TFTP.
Clears dump information from flash memory.
Dumps all switch information, statistics, and configuration.
Redirects the technical support dump (tsdmp) to an external TFTP server.
flags
- Set NVRAM flag word
Usage
Sets the flags that are used for debugging purposes by
NEC technical support.
Command Line Interface 86
Advertisement
Table of Contents
