Table of Contents
Advertisement
Statistics Menu
Introduction
You can view switch performance statistics in the user, operator, and administrator command modes. This chapter
discusses how to use the CLI to display switch statistics.
Menu information
Command: /stats
[Statistics Menu]
port
clrports – Clear stats for all ports
l2
l3
mp
ntp
dump
The following table describes the Statistics Menu options.
Table 34 Statistics Menu options
Command
port <port number>
clrports
l2
l3
mp
ntp <clear>
dump
- Port Stats Menu
- Layer 2 Stats Menu
- Layer 3 Stats Menu
- MP-specific Stats Menu
- Show NTP stats
- Dump all stats
Usage
Displays the Port Statistics Menu for the specified port. Use this command to display
traffic statistics on a port-by-port basis. Traffic statistics are included in SNMP
Management Information Base (MIB) objects.
Clears the statistics for all ports.
Displays the Layer 2 Statistics Menu.
Displays the Layer 3 Statistics Menu.
Displays the Management Processor Statistics Menu. Use this command to view
information on how switch management processes and resources are currently being
allocated.
Displays Network Time Protocol (NTP) Statistics.
Add the argument,
clear
, to clear NTP statistics
Dumps all switch statistics. Use this command to gather data for tuning and debugging
switch performance. If you want to capture dump data to a file, set your communication
software on your workstation to capture session data prior to issuing the dump
command.
Command Line Interface 46
Advertisement
Table of Contents
