Step 4: Removing The Retainer And Packaging Materials - Roland versaArt RE-640 Setup Manual

3. Assembling and Installing

Step 4: Removing the Retainer and Packaging Materials

The machine is provided with retainers and packing materials as protective measures against vibration during
transportation. Remove them after the completion of installation.
 Remove all the retainers and packaging materials. Failure to do so may result in faulty operation or mal-
function when the machine is turned on.
 Be sure to store the retainers and packaging materials because they are required when the machine is
transported during relocation.
Remove the packaging
Packaging
You can attach the removed retainer at the location shown in the figure for storage.
Bottom surface of the
main unit
28
This retainer is used to fill ink.
Retainer
Remove the retainer
Retainer