Roland versaArt RE-640 Setup Manual page 40

6. ECO-SOL MAX ink model: Installing the Ink Cartridges
2.
Clean the print heads using the SOL INK cleaning cartridges.

SELECT INK TYPE
E-SOL Max4COLOR

E-SOL Max4COLOR
[YES] NO
w
x
Flashing
Insert and remove the cartridges of which slot numbers are flashing.
The above sample message shows you should remove the SOL INK cleaning cartridges from the
slots 1 and 2.
When the relevant cartridges are removed correctly, the flashing numbers are cleared.
38
Press
Press
.
Check the ink type and press
[Yes].
Press .
Make sure the drain bottle is installed.
Press .
Insert the SOL INK cleaning cartridges into slots 1 and 2.
Insert the cartridge straight down from the top, as far as it will go.
Label
surface
to display the left figure.
Cleared
to select