Step-By-Step Plotting; Operation Flow - Roland DXY_1350 User Manual

Step-by-Step
Plotting

Operation Flow

When using the DXY, plotting is carried out using the sequence of steps described below. Refer to the pages
indicated for each step for an explanation of how the operation is performed.
1
Set up the plotter.
2
Connect the AC adapter.
3
Connect the plotter to the computer.
4
Select the instruction set.
5
Make other required settings.
6
Load the pens.
7
Turn on the power.
8
Load the paper.
9
Set pen speed.
1 0
Download plot data from the computer.
Perform self-testing.
Åù
8
Be sure to follow this proce-
dure when using the DXY for
the first time. If necessary,
steps 4 and 5 should also be
carried out.
These steps are carried out
when the computer connection
or the paper size has been
changed. All of these settings
are made using the DIP
switches.
Unless the usage environment
has been changed, these steps
are all that needs to be done to
make a plot.
When using the DXY for the
first time, or to confirm
operation of the plotter, a self-
test can be carried out to check
the main unit for problems.