When Transferring The Unit; Procedures From Preparing For Transfer Through Reinstalling The Machine - Roland versaArt RE-640 Setup Manual

9. When Transferring the Unit

Procedures from Preparing for Transfer Through Reinstalling the machine

To transfer this machine, you need to secure the print heads in place with the retainers to protect them from
damage. If you transfer the machine without performing such steps, it may cause ink leakage, which can
damage the internal devices of the machine, or cause damage to the print head.
Important Notes on Transport Operations
 Once the arrangement to transfer the machine is complete, move the machine promptly,
and turn on the power immediately after the machine is relocated. If you leave the machine
without turning on the power, the deposited ink is coagulated, and it may result in problems
such as clogging of the print heads.
 While you are transporting the machine, keep it at a temperature between 5 to 40˚C (41 to
104˚F) and at relative humidity between 20 to 80% (with no condensation). Failure to do so
may result in breakdown.
 When relocating the machine, handle it with care as keeping it upright and preventing it from
striking other objects.
1.
Discard the discharged ink.

Press

MENU
SUB MENU
w
SUB MENU
MAINTENANCE
x
MAINTENANCE
DRAIN BOTTLE
y
EMPTY
DRAIN BOTTLE
CAUTION
50
.
Press
left appears.
Press
Press
Press
When the screen shown on the left appears, detach the bottle,
discard the discharged fluid to empty it.
Before you detach the drain bottle, be sure to wait for the screen to display
"EMPTY DRAIN BOTTLE."
Failing to follow this procedure may cause discharged fluid to flow out of the
tube and spill, soiling your hands or the floor.
several times until the screen shown on the
, and then .
, and then .
.