Step 6 : Remove The Packing Materials - Roland SOLJET PRO 4 XR-640 Setup Manual

Step 6 : Remove the Packing Materials

Tape and other packing materials are attached to the machine to protect it from vibration during transporta-
tion. When the installation is complete, remove these materials.
WARNING
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine for
relocation or the like.
Procedure

Open the front cover and the cover R.
Remove the screws, lift the cover R in the direction of
Front cover

Remove the packing materials.
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
3. Assembling and Installing
, and then pull it out in the direction of
Cover R
Screw
.
33