Table of Contents
Advertisement
Spreadsheet View: Copper Areas Tab
© National Instruments Corporation
Use the Copper Areas tab to work with information for copper areas.
Column
Layer
The layer on which the copper area is found, as set in
the Copper Area Properties dialog box. Refer to the
Viewing and Editing Copper Properties
Chapter 5,
information.
Locked
Yes indicates that the copper area cannot be moved.
No indicates that the copper area can be moved.
Net
The unique identifier for the net to which the copper
area is connected.
Trace
The minimum clearance permitted between the
Clearance
copper area and traces, as set in the Copper Area
Properties dialog box. Refer to the
Editing Copper Properties
Working with Traces and
information.
Thermal
The style of thermal relief for the copper area, as set
Relief Style
in the Copper Area Properties dialog box. Refer to
the
Chapter 5,
information.
Spoke Width
The size of the spokes a thermal relief, as set in the
Copper Area Properties dialog box. Refer to the
Viewing and Editing Copper Properties
Chapter 5,
information.
Description
Working with Traces and
Viewing and Editing Copper Properties
Working with Traces and
Working with Traces and
1-43
Chapter 1
User Interface
section of
Copper, for more
Viewing and
section of Chapter 5,
Copper, for more
section of
Copper, for more
section of
Copper, for more
NI Ultiboard User Manual
Advertisement
Table of Contents
