Table of Contents
Advertisement
Chapter 1
User Interface
Paths Tab
NI Ultiboard User Manual
•
Line width cache size—The number of recently used line widths
Ultiboard keeps in memory. Minimum cache size is 5.
•
Undo buffer size—The number of undo actions allowed.
•
Load last file on startup—Enable if you would like to continue
working on the last file you had open in your previous Ultiboard
session.
•
Unicode Settings box—If desired, enable the Save .TXT files as
plain text checkbox.
•
Language—Select the desired language from the list. You must
restart Ultiboard for all dialog boxes to reflect the new setting.
4.
To apply your changes but leave the Preferences dialog box open,
click Apply. To apply your changes and close the Preferences dialog
box, click
.
OK
The Ultiboard installation puts specific files in specific locations. If
necessary you can point Ultiboard to a new location to find, for example,
database files. You can also use this dialog box to create and specify user
settings files that contain individuals' preferences for all options.
Complete the following steps to change file locations:
1.
Choose Options»Global Preferences. The Preferences dialog box
appears.
2.
Select the Paths tab.
3.
Change the following as desired:
•
Circuit Default Path—This is where all new files are saved,
unless you manually navigate to a new location when saving.
•
User Button Images Path—This is where you store any
user-created button graphics.
4.
Change the User Settings as desired:
•
Configuration File—Contains the user interface settings.
•
New User Configuration File—Click to create a new user
configuration file and select an item from the drop-down list.
5.
Change the settings in the Database Files area as desired:
•
Master Database—The location of the Master Database.
•
Corporate Database—The location of the Corporate Database.
•
User Database—The location of the User Database.
1-14
ni.com
Advertisement
Table of Contents
