Place Toolbar - National Instruments Graphical User Interface Ultiboard User Manual

Place Toolbar

© National Instruments Corporation
Button
Space Down Plus button. Increases vertical space
between two or more objects.
Space Down Min button. Decreases vertical space
between two or more objects.
The Place toolbar contains the functions used to place elements such as
traces, lines and polygons on the design. The Place toolbar buttons are
explained in the table below.
Button
Place Comment button. Places a comment on the design.
Refer to the
Preparing for
information.
Capture Area button. Captures a section of the screen
and places it on the system clipboard.
Select button. De-activates any selected mode (for
example, for placing traces) and allows you to select an
element on the board.
Place Line button. Places a line on the design (or place a
trace, when used on a copper layer). Refer to the
Shapes and Graphics
Parts, for more information.
Place Arc button. Places an arc on the design. Refer to the
Placing Shapes and Graphics
Parts, section for more information.
Place Bezier button. Places a bezier curve on the design.
Refer to the
Chapter 4,
Place Circle button. Places a circle on the design. Refer
to the
Working with
Description
Description
Placing a Comment
Manufacturing/Assembly, for more
section of Chapter 4,
Placing Shapes and Graphics
Working with Parts, for more information.
Placing Shapes and Graphics
Parts, for more information.
1-9
Chapter 1 User Interface
section of Chapter 8,
Placing
Working with
of Chapter 4, Working with
section of
section of Chapter 4,
NI Ultiboard User Manual