Table of Contents
Advertisement
Available languages
Available languages
4.
Install the
printer driver.
-
Important!
If you see a warning stating that the software did not pass Windows Logo testing, select Continue
Anyway.
a.
If the driver is being installed for the first time, make sure that the
b.
Navigate to the
print settings.
•
In Windows 2000,
•
In Windows XP and Windows Server 2003,
box opens.
c.
Start the
Add Printer Wizard.
i.
Select
Add Printer. The Add Printer Wizard opens.
ii.
Select
Next. A Local or Network Printer dialog box opens.
iii.
Select the
Local Printer option button.
iv.
Clear the
Automatically detect and install my Plug and Play printer checkbox.
v.
Select
Next. The Select the Printer Port dialog box opens.
vi.
Select the
Use the following port option button.
vii.
From the list of available ports, select the desired
Note:
Select the first USB port if more than one is listed.
viii.
Select
Next. The Install Printer Software dialog box displays.
d.
Select the
printer driver file.
i.
Select
Have Disk. The Install From Disk dialog box opens.
ii.
Select
Browse.
iii.
Navigate to the folder containing the Prism
•
If you just downloaded the driver,
•
If you are installing the driver for the first time, browse to the software CD and
Prism > Win2k_XP.
iv.
Select the
ccd2kxp.inf file.
v.
Select
Open.
vi.
Select
OK. Rimage Perfect Image Printer PF displays in the Printers list.
vii.
Select
Next.
•
If the driver is being installed for the first time, the
•
If the Prism
existing driver or replace it.
viii.
Select the
Replace Existing Driver option button.
ix.
Select
Next. The Name Your Printer dialog box opens.
e.
Set up the
printer.
-
Important:
Do not change the printer name.
Name Your Printer dialog box, select the Yes option button to use this printer as the default printer, if
i.
In the
desired.
ii.
Select
Next. The Printer Sharing dialog box opens.
iii.
Select the
Do not share this printer option button.
iv.
Select
Next. The Print Test Page dialog box opens.
v.
Select the
No option button.
vi.
Select
Next. The Add Printer Wizard displays the printer settings you have specified.
vii.
Select
Finish.
f.
If you see a warning that states that the software did not pass Windows Logo testing, select
110635_J
Set Up a Standalone Prism Printer or AutoPrism AutoPrinter
navigate: Start > Settings > Printers. The Printers dialog box opens.
navigate: Start > Printers and Faxes. The Printers and Faxes dialog
driver file:
navigate: C: > Win2k_XP.
printer driver was previously installed, the Add Printer Wizard asks whether you wish to keep the
software CD is in the PC disc drive.
printer port.
Name Your Printer dialog box opens. Skip to step e.
navigate: Printer Drivers >
Continue Anyway.
11
Advertisement
Chapters
Table of Contents
