Rimage Prism CDPR11 User Manual

Rimage Prism CDPR11 User Manual

Rimage printer user guide

Advertisement

Quick Links

TM
Rimage PrismPlus!
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Rimage Prism CDPR11

  • Page 1 Rimage PrismPlus! User Guide...
  • Page 3 Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes.
  • Page 4: Support Information

    Product Family and then select your product. If you cannot find a solution on our website, email Rimage Services at support@rimage.com. When you contact Rimage Services, please provide: • Unit serial number and software version. •...
  • Page 5: Table Of Contents

    General cleaning ... 13 Replace consumables ... 15 Learn more ... 18 PrismPlus printer specifications ... 18 Technical support and product updates ... 18 Safety information ... 19 Safety testing... 20 Rimage PrismPlus! Limited 6 Month Warranty..21 110635_G Contents...
  • Page 6 Rimage PrismPlus!
  • Page 7: Introduction

    CD-R. The media in Rimage Media Kits™ is designed for optimum use in the PrismPlus. For information about Rimage Media Kits™ – convenient packages of discs and ribbons, all guaranteed by Rimage –...
  • Page 8: Identify The Parts Of The Prismplus

    Rimage PrismPlus! Identify the parts of the PrismPlus Front view Clamping Pins Drawer and Centering Pin Control panel There are four LEDs and an Operator Button on the operator panel located on the front of the printer. Disc Not Present LED...
  • Page 9 Operator button This button opens and closes the printer tray. There is a yellow LED in the center of this button. LED indicators The LED conditions described below reflect conditions on a Standalone PrismPlus. PrismPlus printers that are mounted in automated equipment have different conditions. For conditions of automated printers, refer to the automated equipment user guides.
  • Page 10: Rear View

    Rimage PrismPlus! Rear view 110635_G...
  • Page 11: Operate The Prismplus

    Use these procedures to step up a standalone PrismPlus printer. Connecting the cables 1. Connect the parallel cable to the parallel cable connection at the back of the printer. 2. Connect the other end of the parallel cable to a parallel port on the back of the PC.
  • Page 12: Installing The Software

    • In Windows XP, navigate: Start > Printers and Faxes. The Printers and Faxes dialog box opens. Important! If you have an earlier version of the Rimage PrismPlus printer driver, delete it before continuing. 2. Add the printer driver. a. Select Add Printer .
  • Page 13 Important: Do not change the printer name. 4. Set up the printer. a. If the Rimage PrismPlus is to be used as the default printer, select Yes. b. Select Next. The printer sharing dialog box opens. c. Select Do not share this printer.
  • Page 14: Powering On The Printer

    Rimage PrismPlus! Powering on the printer 1. To power on the printer press the power switch on the rear of the printer. The printer initializes. 2. To power off the printer press the power switch again. 110635_G...
  • Page 15: Loading The Discs

    In Windows XP, navigate: Start > Printers and Faxes. The Printers and Faxes dialog box displays. 2. Right-click on Rimage Perfect Imager Printer PF and select Properties from the drop-down list. The Rimage Perfect Image Printer PF Properties dialog box displays.
  • Page 16: Setting Ribbon Type, Media Type, And Print Strobe

    Note: When the Detect Media Change option is enabled, you must press the Operator button after you remove the printed disc and place a new disc on the tray. 7. Disable the Perfect Print option. This option is only used for the Rimage AutoPrinter. 8. Select the Media Type.
  • Page 17: Setting The Print Quality

    Note: When the Detect Media Change option is enabled, you must press the Operator button after you remove the printed disc and place a new disc o 9. Disable Perfect Print option. This option is only used for the Rimage AutoPrinter. To make changes that affect c Halftone Setup Properties.
  • Page 18: Centering The Image On The Disc

    There are two ways to center the label. If the printer has a microparallel cable connection, and you have the Rimage serial cable, you can program the offsets. If you do not have the serial cable, you can adjust the print position by changing the top and bottom margins.
  • Page 19: Maintain The Prismplus

    Maintain the PrismPlus General cleaning Cleaning the exterior Wipe the exterior of the printer with a lint free cloth. Cleaning the printhead Clean the printhead at every ribbon change, or more often if streaks start appearing or the ribbon has torn.
  • Page 20 If a cleaning pad is not available, use the following cleaning procedure. 1. Prepare the PrismPlus. a. Power on the PrismPlus. b. To open the printer tray, press the Operator button. c. Power down the PrismPlus. d. Remove the top cover.
  • Page 21: Replace Consumables

    Replace consumables Changing the print ribbon Tip: If ribbons are stored in an environment much different from that of the printer, allow plenty of time for them to become acclimated to the new environment. Allow more time for greater temperature and/or humidity differences.
  • Page 22 Press the operator button until the printer tray comes out. The ribbon is threaded to the front of the PrismPlus. h. Remove the tape from the printer tray. Remove the adhesive strip from the ribbon leader. 3. Load the take-up roller.
  • Page 23 Install the take-up roller in the PrismPlus and press down firmly until the take-up roller snaps into place. Important! Do not roll the STOP - Wind Leader Onto Take-up Core Stopping here marking on the Ribbon Leader onto the take-up roller. The marking should not be past the point shown in the picture on page 16.
  • Page 24: Learn More

    Windows XP requires 128 MB Technical support and product updates Support for the PrismPlus is available through your authorized reseller. Important! Register your PrismPlus online or complete and return the registration card so Rimage can notify you of upgrades as they become available. 110635_G...
  • Page 25: Safety Information

    Caution! Do not reach inside the printer unless absolutely necessary. There may be sharp edges on some metal parts. Caution! Do not use the printer if it is overheating or an abnormal smell is detected. This ma result in a fire and an electric shock. In case of heating or abnormal smell, immediately disconnect the cable from the outlet.
  • Page 26: Safety Testing

    Rimage PrismPlus! Safety testing Product name: PrismPlus Printer Model: cdprs Notice for USA Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 27 To Rimage’s location in Germany from a location in Europe with a typical response of 15 business days. To Rimage Minnesota from a location that is not in the US or Canada with a typical response of up to 25 business days.

This manual is also suitable for:

Prismplus

Table of Contents