Toshiba Satellite T110 Maintenance Manual page 149

Chapter 4 Replacement Procedures
4 2
4.1 Overview
This chapter describes the procedure for removing and replacing the field replaceable units
(FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one.
The chart below provides a guide as to which other FRUs must be removed before a
particular FRU can be removed. The numbers in the chart indicate the relevant section
numbers in this manual.
In all cases when removing an FRU, the battery pack must also be removed. When repairing
an FRU that is the potential cause of a computer fault, use the chart to determine the order in
which FRUs need to be removed.
The tilt stand, if it is installed, can be removed without any other FRUs removed.
4.10 Touch 4.17 Speaker
Pad
 Chart Notation
The chart shows the case for the
following example:
 Removing a MDC
All FRUs down to the "4.2 Battery
pack"to"4.8 Cover assemblies" above
USB board must be removed.
Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
4.2 Battery Pack
4.3 HDD
4.4 Memory Module
4.5 Keyboard
4.9 TOP Cover Assembly
4.6 Wireless LAN
Box Card and BT module
4.12 System Board
4.16 Application for Thermal pad and
grease on CPU and North Bridge
4.7 3G
module card
4.11 I/O Boards
4.8 Display
Assembly
4.14 LCD unit
4.15 WEB
Camera module
1