Toshiba Satellite T110 Maintenance Manual page 161

Chapter 4 Replacement Procedures
5. Remove the following screws securing the HDD holder and remove the HDD holder.
 M3.03.5F
Installing HDD-H9.5mm
The following describes the procedure for installing the main HDD.
1. Install a HDD to the HDD holder and secure it with the following screws.
 M3.03.5F
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kgf-cm for
four screws securing the HDD holder.
2. Connect HDD carefully to the HDD cable
3. Insert the HDD assembly with HDD cable into the HDD slot.
4. Secure the HDD assembly with the following screw.
 M2.04.0F FLAT BIND screw
Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
FLAT BIND screw
M3×3.5
Figure 4-3-3 Remove HDD
FLAT BIND screw
x4
x4
x4
13