HP ProCurve 9304M Installation And Configuration Manual page 415

To display detailed GVRP information for an individual port, enter a command such as the following:
HP9300(config)# show gvrp ethernet 2/1
Port 2/1 -
GVRP Enabled : YES
GVRP Learning : ALLOWED
GVRP Applicant : ALLOWED
Port State : UP
Forwarding : YES
VLAN Membership:
This display shows the following information.
Table 12.2: CLI Display of Detailed GVRP Information for a Port
This Field...
Port number
GVRP Enabled
GVRP Learning
GVRP Applicant
Port State
Forwarding
Configuring GARP VLAN Registration Protocol (GVRP)
[VLAN-ID]
1 FORBIDDEN
2
1001
1003
1004
1007
1009
1501
2507
4001
4093 FORBIDDEN
4094 FORBIDDEN
Displays...
The port for which information is being displayed.
Whether GVRP is enabled on the port.
Whether the port can learn VLAN information from GVRP.
Whether the port can advertise VLAN information into GVRP.
The port's link state, which can be UP or DOWN.
Whether the port is in the GVRP Forwarding state:
• NO – The port is in the Blocking state.
• YES – The port is in the Forwarding state.
[MODE]
FIXED
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
12 - 11