Store & Forward (T.37) Parameters; Adding Additional Hosts - Multitech FaxFinder FF240 Administrator's Manual

Store & Forward (T.37) Parameters
Field
Enable T.37
Require Authentication
Set User from Envelope
Sender
Fax Priority
Max Attempts
Retry Interval
Email Fax Receipt
Print Fax Receipt
Select Printer
Print with First Page
Fax Attachment with
Receipt
Include Cover Page
Default Cover Page
Use Email Body as
Comments

Adding Additional Hosts

You can add additional hostnames and IP addresses that FaxFinder will accept email faxes from. For example, your
hostname is example.com, but you also want to allow T.37 faxing from mycompany.example.com.
®
FaxFinder Fax Server FF240, FF440, FF840 Administrator Guide
Description
Check to enable T.37 faxing.
Check to require a valid username and password to use with Store & Forward faxing.
Check to link faxes sent via T.37 emails with user accounts found in the FaxFinder
Users menu. When FaxFinder matches a sender's email address with a FaxFinder user,
it logs the fax as sent by that user. Also, if you enable Include Cover Page, FaxFinder
populates the cover page's sender information with the user's information.
Set the default priority for store and forward faxing. This setting is used when there
are more faxes in the queue than there are available modems. Options are:
■ Low
■
Medium/Low
■ Medium
■
Medium/High
■ High
■
1st Priority
Enter the maximum number of times you want FaxFinder to fail sending an email fax
before treating that fax as failed.
Enter how long, in seconds, you want FaxFinder to wait between unsuccessful
transmission attempts.
Set the condition that will trigger an email to the sender. Options are:
Failure Receipt sent only if the fax fails.
Always Receipt sent on completion, success or failure.
Never Receipts are never sent.
Set the condition that will trigger the fax receipt to be printed. Options are the same
as Email Fax Receipt. Never is the default.
If you select Failure or Always as an Print Fax Receipt option, select which printer you
want to use from the drop down list. None is the default.
Check this option if you want the fax receipt to print with the fax's first page.
Attaches a copy of the sent fax with the email fax receipt. Use this drop down list to
select the attachment format. Options are. PDF, TIFF, or None. Default is PDF.
Check this to include a cover page with Store & Forward faxes.
Select the cover page to use by default with Store & Forward faxes.
Check this if you want the body of the email inserted as fax comments.
ADVANCED CONFIGURATION
69