Store & Forward Fax (T.37) - Multitech FF240-IP User Manual

Store & Forward Fax (T.37)
Store and Forward fax (or T.37) is described in detail with examples in a later chapter. Here we are
describing the parameters for T.37 that can be input into the FF240-IP unit through the web interface.
Store & Forward Fax (T.37): Parameters
Enable T.37
To allow the use of Store and Forward faxing on this FF240-IP unit, check this box, else it will not
be allowed.
Require Authentication
Check the Require Authentication box to force users to have a valid username and password to
use Store and Forward faxing.
Set User From Envelope Sender
Check this box to set the User from the envelope sender.
Default Scheduling Priority
Select the priority for scheduling store and forward faxing. The range is 0 to 5, with 0 being the
highest priority. This setting will come in to play when there are more faxes in the queue that
need to be sent out than there are available channels.
Maximum Tries
Enter the maximum number of tries that you want the FF240-IP to attempt without a successful
completion before considering the fax as failed.
Interval Between Tries
Enter the time in seconds that you want the FF240-IP to wait between unsuccessful transmission
attempts.
Multi-Tech Systems, Inc.
Chapter 3: Web Management Interface
FF240-IP Admin User Guide
53