Server Certificate Fields; Adding Individual Users - Multitech FaxFinder FF240 Administrator's Manual

To generate a certificate:
1. Click System Configuration > Certificates.
2. Click Create.
3. Enter certificate information. Refer to Server Certificate Fields for details. The values you enter are for
identification purposes only.
4. Click Generate. You will be prompted to reboot FaxFinder.
5. Reboot FaxFinder.

Server Certificate Fields

Unless otherwise specified in the table below, you can enter up to 64 characters in these fields.
Field
Common Name
Days
Country
State/Province
Locality/City
Organization
Email Address

Adding Individual Users

Users are those who send faxes through FaxFinder. Multi-Tech recommends adding users into FaxFinder before
installing the FaxFinder Client software on a user's workstation.
If you have several users to add, you can import a Comma Separated Value (CSV) file with user information. Refer
to Importing Users for details.
Note: The Admin user cannot be deleted. To change the password or other Admin account information, click
Edit for the Admin.
To add users individually:
1. Click Users to create user accounts.
2. Click Add.
3. Enter user information. Refer to User Fields below for details.
4. Click Save to save the entry.
5. Repeat Steps 2-4 for each user you want to add.
®
FaxFinder Fax Server FF240, FF440, FF840 Administrator Guide
Description
Enter the hostname or IP address, depending on which you use to connect to FaxFinder.
The web browser uses this field to check for a valid certificate.
Enter up to three digits for number of days that the certificate is valid.
Enter the two letter code for the country the certificate is valid for. US is the code for the
United States. To find other country codes, search the web for "ISO country codes."
Enter the state or province for which the certificate is valid.
Enter the city or locality for which the certificate is valid.
Enter the organization name for which the certificate is valid.
Enter the email address of the person responsible for the FaxFinder. Typically this is the
administrator. This field may be left blank.
BASIC FAXFINDER CONFIGURATION
33