Adjustment Procedure - Panasonic WV-CS850B Service Manual

ADJUSTMENT PROCEDURE

1. Test Equipments Required
8
The following Test Equipments are required for
adjustment of the
CS850B/CS854BE.
8
Oscilloscope
8
Frequency Counter
8 Digital Voltmeter
8 Vectorscope
8 Underscanned Colour Video Monitor
8
12 V DC Power Supply Unit
8
Lux Meter
8
Lighting (275 footcandles (2 750 lx), Colour Temperature
3 200 ˚K)
8
Personal Computer (IBM PC/AT type or equivalent)
8 Standard Straight RS-232C Cable
8 White Chart or White Paper
8 Radiation Chart
8
Colour Temperature Conversion Filters as shown in Table
1-1.
Part No.
KODAK 80B
KODAK 80B and 82C
Table 1-1
8 Logarithmic Gray Scale Chart (Part No.: YWV2310RB99).
8
Colour Chip Chart (Part No.: YWV2100RB98).
8
System Controller such as WV-CU151 or WV-CU161.
8
Electric Variable Resistor (E.V.R.) kit (Part No.:
YWV0EA1174AN) as shown in Fig. 1-1.
Fig. 1-1
8
Extension Cable for the Power Board and the Base Unit
(Part No.:V0EA1266AN) as shown in Fig. 1-2.
Fig. 1-2
Combination Camera
Description
change from 3 200 ˚K to 5 100 ˚K
change from 3 200 ˚K to 6 500 ˚K
Extension Board Ass'y A - D(Part No.: V0EA1265AN).
8
Extension Cable A for CN201 of the Main Board and
the Lens as shown in Fig. 1-3.
WV-
Extension Cable B for CN4 of the Main Board and CN1
of the Servo Board as shown in Fig. 1-4.
Extension Cable C for CN5 of the Servo Board and the
Pan Motor as shown in Fig. 1-5.
Extension Cable C for CN2 of the Servo Board and the
Tilt Motor as shown in Fig. 1-6.
Extension Cable D for CN1 and CN2 of the
Communication Board and the Base Unit as shown in
Fig. 1-7.
8
CCD Mounting Adjustment Jig (Part No. : V0MA1120AN)
as shown in Fig. 1-8.
– 2-2 –
Fig. 1-3
Fig. 1-4
Fig. 1-5
Fig. 1-6
Fig. 1-7
Fig. 1-8