Table of Contents
Advertisement
DC:
The mounted lens.is one of the lenses listed
on pages 9, 10 and 11 or one that requires
the DC control signal for auto iris control.
VIDEO:
The mounted lens requires video signal for
auto iris control.
Note:
Refer to item on page 5 for the lens selection
switch.
-15-
FOCUS OR FLANGE-BACK
ADJUSTMENT
The follawing adjustment should be made by qualified
service personne! or system installers.
}. Loosen screws on the flange-back adjusting ring.
Focus adjust for
C-mount lens
Focus adjust for
CS-mount jens
2. Turn the flange-back adjusting ring to the desired
position.
Caution: Do not turn this ring too much to counter-
clockwise
as this could
damage
the inner
glass and CCD image sensor.
3. Tighten the screws on the flange-back adjusting
ring.
Note: Do not apply the excessive torque (0.5
kg.cm, recommended) to the screws on the
flange-back adjusting ring.)
Advertisement
Table of Contents
