Table of Contents
Advertisement
PH Gas Logs
The positioning of the logs are critical to the safe and clean operation of this heater. Sooting and
other problems may result if the logs are not properly and fi rmly positioned in the appliance.
Never add additional logs or embellishments such as pine cones, vermiculite or rock wool to
the heater. Only use the logs supplied with the unit.
Failure to position the parts in accordance with diagrams below or to use only parts specifi cally
approved for this heater may result in property damage or personal injury.
PLACE PH30-R LOGS
1. Place Rear Log (#1) on rear support. Figure 24
2. Place Left Middle Log (#2) on middle support and
burner. Figure 25
3. Place Right Middle Log (#3) on middle support.
Figure 25
NOTE: Logs #1, #2 and #3 have ridges on the
bottom which secure the logs to burner frame.
After installing each log, check to be sure it
is stable.
Left Middle Log #2
Figure 25
20
Figure 24
Right Middle
Log #3
LG1093
LOG PLACEMENT
Rear Log #1
LG1092
65D2035
Advertisement
Table of Contents
