Op-01621, Op-01671 Supply Low - DataCard SP75 Manual

OP-01621, OP-01671 Supply Low

Supply material in the laminator is low.
This message does not indicate a problem; it means that at least 90 percent
of the supply material in the laminator has been used. This message is for
your information so that you can plan to replace the supply material.
When you press the Ready key on the LCD panel, or the OK button on the
message box, the message is not displayed again even if the condition
continues, until you power off and power on the printer.
If you cannot fix the problem, contact your service provider for assistance.
Page 100