DataCard SP75 Manual page 101

L2 laminator. Ask your administrator if you are not sure which material to
load for this laminator.
• Insert the cartridge marked L1 in the L1 opening and insert the cartridge
marked L2 in the L2 opening.
• If you are setting up the printer for the first time, write down the settings
to use and identify which material to load in each laminator so all
operators load supply material correctly.
If you cannot fix the problem, contact your service provider for assistance.
Related Topics:
"Loading laminator supply material" on page 9
"Opening Properties or Printing Preferences" on page 17
Page 96