Cadillac Escalade EXT Owner's Manual page 62

$10araEscaladeEXT Page 62 Wednesday, October 14, 2009 9:54 AM
Instrumentation and Controls
Press the button to enter the
submenu.
While in this submenu, press
the button repeatedly to
scroll through the following
options:
- NORMAL (normal)
- LOUD (loud)
- NO CHANGE (no change)
Once the desired setting is
displayed, press the
to select it.
You may now either exit pro-
gramming mode or program
the next available feature.
To exit programming mode,
see "Exiting Programming
Mode" later in this section.
. . . 62
• PARK TILT MIRRORS (park tilt
mirrors)
With this feature turned on,
the passenger's and/or driver's
mirror will tilt down to a
pre-programmed position,
whenever the vehicle is shifted
into R (Reverse) to allow you to
view the curb while you parallel
park.
Press the button to enter the
submenu.
button
While in this submenu, press
the button repeatedly to
scroll through the following
options:
- OFF (off)
The outside mirrors do not tilt
down when the vehicle is
shifted into R (Reverse).
This is the default setting.
- DRIVER MIRROR (driver
mirror)
The outside mirror on the
driver's side of the vehicle
will tilt down to a curb-view
position when the vehicle is
shifted into R (Reverse).
- PASSENGER MIRROR (pas-
senger mirror)
The outside mirror on the
passenger's side of the vehicle
will tilt down to a curb-view
position when the vehicle is
shifted into R (Reverse).
- BOTH MIRRORS (both mir-
rors)
Both outside mirrors will tilt
down to a curb-view position
when the vehicle is shifted
into R (Reverse).
- NO CHANGE (no change)