Removing/Installing The Batteries - Invacare Storm4 X-plore User Manual

Invacare® Storm®⁴ Series
1. Remove the rear cover as described in chapter 8.4.1 Opening
the rear cover, page 89.
2.
Pull the snap fitting (1) beside the power module backwards.
3. Lift the power module with the holder and remove the mounting
from the battery cap flap.
4. Place the power module and the mounting on top of the battery
compartment or actuator module, if applicable.
90
5.
Press both locking mechanisms (3) in and open the battery flap.
6.
Use the strap (3) to pull the batteries (1) and the battery carrier
(2) forward as far as possible.

8.4.3 Removing/Installing the batteries

Tools:
•
11 mm socket spanner
1529686-R