Invacare Storm4 X-plore User Manual page 24

Invacare® Storm®⁴ Series
NOTE - speed limiter
– The lifter is fitted with sensors which reduce the
mobility device speed as soon as the lifter is raised
above a certain point.
– This takes place to guarantee the tipping stability of the
mobility device and to avoid damage to the legrests.
– If the speed limit is activated, a corresponding blink
code is displayed on the remote or a reduced drive
level is set automatically. Please refer to the remote
manual for more information.
– To reapply normal speed, run the lifter down until the
status display stops blinking.
CAUTION!
Risk of tipping, if the speed limiter sensors fail
when the lifter is raised
– If you find that the speed reduction function is not
working when the lifter is raised, do not drive with
the lifter raised and immediately contact an authorized
Invacare dealer.
24 1529686-R