Invacare Storm4 X-plore User Manual page 39

1. Loosen screws A.
2. Adjust hip support to desired width.
You can adjust the width only smaller than the seat
width but not wider.
3. Tighten screws.
Adjusting angle of hip support
Tools
•
5 mm Allen key
1. Loosen screws A.
2. Adjust hip support to desired angle.
3. Tighten screws.
Adjusting hip pad depth
Tools
•
10 mm open-ended wrench
1529686-R
Adjusting the mobility device to the user's seating posture
Loosen the two screws A.
1.
2. Adjust hip pad to desired depth.
3. Tighten screws.
Adjusting hip pad height
You can adjust the hip pad height in two ways:
•
Via its mounting slots.
•
Via its bracket.
Via mounting slots
Tools
•
10 mm open-ended wrench
39