Adjusting The Adaptable Backrest Padding - Invacare Storm4 X-plore User Manual

On both sides, loosen and remove the upper backrest screw A.
1.
2. Set the required backrest angle in 7.5° steps.
Use scale B on the backrest for this purpose. Ensure that you
set the same angle on both sides.
3. Re-insert and tighten the screw.
Ensure you insert the screw through one of the holes of the
backrest bracket. The screw must be visible on the inside of the
bracket and the screw head must be flush with the bracket.
Simple backrest
Tools:
•
6 mm Allen key
1529686-R
Adjusting the mobility device to the user's seating posture
On both sides, loosen and remove the middle backrest screw A.
1.
2. Set the required backrest angle in 7.5° steps.
Ensure that you set the same angle on both sides.
3. Re-insert and tighten the screw.

5.7.7 Adjusting the adaptable backrest padding

There are two ways of adapting the backrest padding.
•
Using a snap buckle which is accessible without having to remove
the backrest cushion. Please see Method 1.
•
With adjustment straps which are adjustable using Velcro.
Please see Method 2.
Method 1
45