Invacare Storm4 X-plore User Manual page 46

Invacare® Storm®⁴ Series
1. Open the Velcro straps on the left-hand side of the backrest
cushion.
2.
Open the individual snap buckles (1) on the adjustment straps.
3. Adjust the strap tension as required and then close the snap
buckle again.
4. Close the backrest cushion Velcro fastenings again.
Method 2
46
1.
Remove the backrest cushion (fixed with Velcro straps) by
pulling it up and away so that you can access the adjusting straps.
2.
Adjust the tension of the individual straps as required.
3. Replace the backrest cushion.
1529686-R