Invacare Storm4 X-plore User Manual page 21

D
E
F
G
Explanation of symbols on labels
Do not lean out when the lifter is raised!
Do not drive up or down slopes when the lifter is
raised!
1529686-R
Indication of the maximum
width to which the armrest
can be set
Identification of the position
of the coupling lever for
driving and push operation
(only the right side is visible
in the picture).
For details see below.
Identification label sticker on
the chassis at the rear right.
For details see below.
Warning not to use the cable
loop as an anchoring point
Do not allow any body parts to get under a raised
seat!
Never drive with two people!
Never drive over uneven surfaces when the lifter
is raised!
Read the user manual
This symbol indicates the "Drive" position of the
coupling lever. In this position the motor is engaged
and the motor brakes are operational. You can drive
the mobility device.
•
Note that for driving purposes both motors
must always be engaged.
Safety
21