Calling By Entering An Address Directly - Panasonic KX-VC1600SX User Manual

Calling by Entering an Address Directly

When using IP mode, you can make a video conference call by entering the IP address (or host name), SIP
URI (or SIP user name), H.323 extension, H.323 name, or MCU's conference room number@IP address.
When using NAT Traversal mode, you can make a call by entering the connection number.
1 Press [MENU].
•
The Menu screen is displayed.
2
Select "Manual Dial" using [
[ENTER].
•
The manual dial screen is displayed.
Note
•
You can display the manual dial screen by
pressing [START] in the Home screen instead
of performing steps 1 and 2.
3
Use [ ][
input ("Connection mode 1" to "Connection mode
9") and press [ENTER].
4
Use [ ][
(SIP)", "IP Mode (H.323)", "NAT Traversal Mode").
5
Use [ ][
6 When using IP mode, enter the IP address (or host
name), SIP URI (or SIP user name), H.323 extension,
H.323 name, or MCU's conference room number@IP
address. When using NAT Traversal mode, enter the
connection number (7 digits).
Note
•
When starting multiple-party video conference
calls, repeat steps 3-6.
•
When calling more than 4 parties, press [R] to
display the next page.
7
Use [ ][
and press [ENTER] on the first page.
8
Use [ ][
used ("Not Specified", "256 kbps"–"18 Mbps"). (The
default maximum selectable value: "9.0 Mbps")
Document Version 2015-03
][
] to select the connection mode you want to
] to select the connection mode ("IP Mode
] to select the site ("Site 1" to "Site 9").
] to select "Outgoing Bandwidth / Site"
] to select the outgoing bandwidth/site to be
] and press
Starting a Video Conference
1
2-5,
7-8
9
6
10
User Manual 51