Panasonic KX-VC1600SX User Manual page 91

3.
Use [ ][ ] to select "Not Registered".
4.
Press [B].
•
The profile settings screen is displayed.
5.
Use [ ][ ] to select the following items for input:
"Group": Enter a name for the profile (up to 24
characters) (Page 141).
"Entry Restriction": Use [
whether to restrict sites that have not been
registered from joining a conference room.
–
"ON": Entry to conference rooms is restricted.
–
"OFF" (default): Entry to conference rooms is
not restricted.
"Screen Layout": Press [ENTER] and use [
[ ] to select the screen layout.
–
"Auto" (default): Automatically changes the
layout depending on the number of parties
joining a video conference call.
–
"CP1" to "CP10": The selected screen layout
is displayed (Page 64).
"The Main Position": Press [ENTER] and use
[ ][ ] to select the screen to display as the main
display (display priority 1).
–
"Voice Activation 1" (default): The site with the
loudest volume is automatically displayed as
the main display.
–
"Voice Activation 2": Your own site's image is
displayed as the main display, and the site with
the loudest volume at the time is displayed as
display priority 2.
–
"Local Site": Displays your own site.
–
"Site 1" to "Site 20": Displays the image of the
selected connection as the main display.
"Site name display": Select whether to display site
names during a multiple-party connection.
–
"ON" (default): Display site names.
–
"OFF": Do not display site names.
Document Version 2015-03
][ ] to select
]
"Other Site's Audio": Select whether to forcibly
mute the audio of other parties during a
multiple-party connection.
–
"Mix": Audio is output that combines the audio
of the other party with that from the Main Site.
–
"Mute" (default): Mutes the audio of other
parties.
6.
Use [ ][ ] to select "Site" and press [ENTER].
•
The site selection screen is displayed.
Note
•
If there are no registered contacts with a
" " mark in the selection column, a call will
not be made even if [START] is pressed.
7.
Use [ ][ ] to select "Not Registered" and press
[B].
•
A dialogue box is displayed for selecting the
input method.
When "Input Address" is selected
•
The address input screen is displayed.
Use [ ][
for input:
"Connection mode": Press [ENTER] and
use [ ][
(communication type) and press [ENTER].
–
"IP Mode (SIP)" (default): SIP is used
for communication.
Contacts and Settings
] to select the following items
] to select the connection mode
User Manual 91