Calling From The Call History - Panasonic KX-VC1600SX User Manual

Calling from the Call History

You can make a video conference call from the call history. The call history is divided into outgoing and incoming
calls. The last 50 video conference calls made and received are stored in the outgoing and incoming call history.
Information such as the contact name, group name, address information
the call, the result of the call, and the connection mode is displayed for each call on the outgoing call history
screen and incoming call history screen. If the address of an entry in the call history is deleted from or edited
in the contact list, the contact name in the call history entry will be replaced by the address information.
*1 Address information is as follows.
IP address/host name/SIP URI/H.323 extension/H.323 name/MCU's conference room number@IP address/MCU's SIP user
name@IP address/connection number. (When using NAT Traversal mode, the connection number is displayed.)
Note
•
If the other party uses the same SIP domain name as you, only the SIP user name, and not the SIP
URI (SIP user name@SIP domain name) will be displayed in the call history.
Outgoing Call History:
•
For video conference calls made using the contact list, the contact name is displayed. For video conference
calls made by entering the IP address (or host name)/SIP URI/H.323 extension/H.323 name/MCU's
conference room number@IP address/connection number directly (Page 51), that information is displayed
instead of the contact name. (That information is displayed even if a matching entry exists in the contact
list.)
•
Even when a profile is used to make a video conference call, the call will appear in the outgoing call history.
You can then make a video conference call with a profile from the outgoing call history.
•
If consecutive video conference calls are made to the same destination, only the latest call will appear in
the outgoing call history.
Incoming Call History:
•
If the calling party's IP address/SIP URI/H.323 extension/H.323 name/MCU's conference room
number@IP address/connection number is registered in the contact list, the contact name/group name is
displayed. Otherwise, the IP address (or host name)/SIP URI/H.323 extension/H.323 name/MCU's
conference room number@IP address/MCU's SIP user name@IP address/connection number is
displayed.
•
Depending on the type of MCU, a video conference call may be received from the MCU's SIP user
name@IP address rather than the MCU's conference room number@IP address. In that case, you directly
cannot call the MCU's conference room from this incoming call history.
•
If consecutive unanswered video conference calls are received from the same party, only the latest call
will appear in the incoming call history.
•
When connecting to a non-Panasonic video conference system, you may not be able to initiate video
conference calls with SIP URIs (or SIP user names)/H.323 extension/H.323 name in the incoming call
history. In this case, contact your network administrator.
Document Version 2015-03
Starting a Video Conference
, the date and time, the duration of
*1
User Manual 53