1.
Select "Call set up" and press [ENTER].
•
The connection settings screen is displayed.
2.
Use [
][
] to select the following items for input:
•
The following items are displayed over 2 pages.
To view all the items, press [R] to move to the
next page, and press [B] to move to the
previous page.
Note
•
You must save the settings separately
for each screen on which you changed
the settings.
•
When "SIP" is set to "OFF" on the call
type settings screen (Page 118),
"Encryption (SIP)" cannot be set.
•
When "H.323" is set to "OFF" on the
call type settings screen (Page 118),
"Encryption (H.323)" cannot be set.
"Answer Mode": Use [
answer video conference calls ("Manual" [default]
or "Auto") (Page 56).
"More than one incoming call": Use [
select whether to accept calls from Sub Sites to
make video conferences of more than 2 parties.
–
"ON": Allow calls with more than 2 parties.
–
"OFF" (default): Do not allow calls to have more
than 2 parties.
Note
•
For sites operating as "Main Sites" in
multiple-party video conference calls using
the built-in MCU, select "ON".
"Max. Bandwidth": Press [ENTER] and use [
[
] to select the maximum allowed bandwidth to
be used (256 kbps–18 Mbps) (default: 9.0 Mbps).
Note
•
During a 2-party call, the bandwidth of the
site with the lowest-set maximum
bandwidth is applied, and in a multiple-party
call, bandwidth is applied according to each
site's maximum bandwidth and the number
of connected sites.
•
You cannot select a value that is higher than
the maximum bandwidth set by the dealer.
For details, contact your dealer.
"Dual stream": Use [
stream communication is enabled.
–
"ON" (default): Enables dual stream
communication.
–
"OFF" Disables dual stream communication.
Document Version 2015-03
][
] to select how to
][
][
] to select whether dual
"Encode rate": Press [ENTER] and use [
to select the encoding rate ratio for the main stream
and sub stream.
–
"Main (30%) < Sub (70%)": Prioritise the sub
stream during calls.
–
"Main (50%) = Sub (50%)" (default): Use the
same priorities during calls.
–
"Main (70%) > Sub (30%)": Prioritise the main
stream during calls.
"Encryption (SIP)": Use [
to enable encryption.
–
"ON": Encryption is enabled.
–
"OFF" (default): Encryption is disabled.
"Encryption (H.323)": Press [ENTER] and use
[
][
] to select whether to enable encryption.
–
"Best effort" (default): Enables encrypted
communication when the other party has
"ON" set for encrypted communication. When
"OFF" is set, communication is performed
without encryption.
–
"ON": Encryption is enabled.
–
"OFF": Encryption is disabled.
] to
Note
•
Be careful when changing encryption
settings because doing so may cause you
to become unable to communicate with
other parties.
•
Be aware that if encryption is disabled,
eavesdropping might be possible on
networks that are not secured against such
actions.
•
If you cannot specify a value for
"Encryption (SIP)"/"Encryption (H.323)"
]
because the setting is unavailable, contact
your network administrator.
"Video Quality": Press [ENTER] and use [
[
] to select between prioritising smooth
movement or image quality for video.
–
"Motion" (default): Prioritise smooth
movement.
–
"Sharpness": Prioritise image quality.
–
"Resolution (Max. Full HD)": Fixes the
resolution to full HD or the other party's
maximum resolution, whichever is lower,
regardless of the communication bandwidth.
–
"Resolution (Max. HD)": Fixes the resolution
to HD or the other party's maximum resolution,
whichever is lower, regardless of the
communication bandwidth.
Contacts and Settings
][
]
][
] to select whether
]
User Manual
101