Cleaning The Media Transfer Surface; Cleaning The Exterior Surfaces - Ricoh PRO L4130 series Care And Maintenance Manual

Cleaning the Media Transfer Surface ("Cleaning the Media Transfer Surface" Chapter
4 of the Operation Manual)

Cleaning the Media Transfer Surface

The Media Transfer Surface easily gets dirty with lint,
paper dust, etc. generated when a media is cut.
Wipe off conspicuous stains with a soft-hair brush, a dry
cloth, a paper towel, etc.
• When the Media Transfer Surface is
stained with ink, wipe it off with a paper
towel containing a small amount of
Cleaning Fluid for maintenance.
• Before cleaning the Media Transfer Surface, make sure that the Media Transfer Surface has cooled
adequately.
• Because dust and dirt are easily accumulated in the slots for holding a media and cutting paper (cutter
slot), be sure to clean these parts carefully.
Exterior ("Cleaning the Exterior Surfaces" Chapter 4, Operation Manual)

Cleaning the Exterior Surfaces

When the exterior surfaces of the machine are stained,
dampen a soft cloth with water or a neutral detergent
diluted with water, squeeze it, and wipe the surfaces with
the cloth.
12