Ricoh PRO L4130 series Care And Maintenance Manual page 6

8
Clean the wiper slider.
• Wipe off the ink sticking of the figure with a clean stick dipped in
Cleaning Fluid for maintenance.
Wipe off so that Cleaning Fluid for maintenance will not remain.
9
Set the wiper at the original position.
• Insert the wiper by holding both ends of the wiper.
10
Clean the area around the wiper.
• Dip the clean stick in the cleaning liquid for maintenance, and wipe the space below the wiper guide, and
the space between the wiper slider and ink guard W.
Wiper guide
Enlarged view of the Wiper Slider
and Ink Guard W
Space below the wiper guide
Do not clean this part
Clean this part along the rail
Wiper guide
6
Clean
Projection
Ink guard W
Space between the wiper
slider and ink guard W