Ricoh PRO L4130 series Care And Maintenance Manual page 19

Filling the white ink
Turn on the power supply of the printer and fill white ink.
• When replacing the white ink filter, be sure to wear the attached goggles and the gloves. Ink
may get in your eyes.
• Organic solvent is used for ink.
If it adheres to your skin or gets in your eyes, immediately wash off with water enough.
1
Turn ON the power of the printer.
2
Select [FILL UP INK] of the maintenance menu.
(1) Press the
(2) Select [MAINTENANCE] by pressing the
(3) Select [FILL UP INK] by pressing the
3
Press the
4
Press
5
Press the
• The screen to check air purge valve OPEN is displayed.
6
Open the right maintenance cover.
7
Open the air purge valve.
• Using a flat-blade screwdriver, rotate the air purge valve so that
the slot of it may be horizontal.
8
Close the right maintenance cover.
key in the Local.
key.
to select damper [ _ _ _ _ YKWW].
key.
19
< L OCA L >
keys then press the
keys.
S E L EC T DAMP ER
MMCC _ _ _ _
S E L EC T DAMP ER
_ _ _ _ Y KWW
A I R PG V A L V E OPEN
COMP L E T ED
Air purge valve
Make the slot
horizontal.
key.
[ EN T ]
Right maintenance cover