Ricoh PRO L4130 series Care And Maintenance Manual page 3

5
Open the left maintenance cover.
(1) Turn four screws that fix the maintenance cover to
the left, and remove them.
(2) Remove the maintenance cover.
• If the maintenance cover is hard to remove, use the
supplied screwdriver.
6
Wipe ink sticking to the side of the head off with a clean stick.
• To prevent gelled/ solid ink ground from pooling at the front of the carriage, scrape them off with clean stick
etc.
• Clean the side surface of the head (shown in deep gray) with a clean stick.
• Never rub the nozzles.
Clean with a clean stick.
Wipe off the
gelatinous or
solid ink residue.
7
Press the
8
Close the left maintenance cover then press the
• After its initial operation, the machine returns to step1.
The nozzle part (Never
touch it.)
Before cleaning
key after the cleaning.
key.
Rotate it left.
Maintenance
cover
3
Screw
Screw
After cleaning
C l o s e c o v e r
COMP L E T ED [ EN T ]