Ricoh PRO L4130 series Care And Maintenance Manual page 11

4
Press the
• Carriage will move to the left end of this device.
• If the carriage is not covered by the ink cap for a long period of
time, the nozzle face of the head may get dry and clogged,
resulting in white lines being left in the printed image.
• The buzzer sounds periodically while the carriage is out of the
capping station. The buzzer sounds at shorter interval when the
print heater temperature is high.
5
Open the left maintenance cover.
(1) Turn four screws that fix the maintenance cover to
the left, and remove them.
(2) Remove the maintenance cover.
• If the maintenance cover is hard to remove, use the
supplied screwdriver.
6
Clean the media sensor.
• Wipe off the dusts and stuck ink with soft cloth or clean
sticks.
Cleaning of the media sensor at the rear surface of the machine
Wipe off the dusts and stuck ink with soft cloth or clean sticks.
key.
11
Rotate it left.
Maintenance
cover
Media sensor on the head
Media sensor
Screw
Screw