Draytek Vigor2920n User Manual page 53

Static or Dynamic IP
Keep WAN Connection
WAN Connection
Detection
MTU
RIP Protocol
WAN IP Network
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Normally, this function is designed for Dynamic IP
environments because some ISPs will drop connections if there
is no traffic within certain periods of time. Check Enable
PING to keep alive box to activate this function.
PING to the IP - If you enable the PING function, please
specify the IP address for the system to PING it for keeping
alive.
PING Interval - Enter the interval for the system to execute
the PING operation.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference. TTL
value is set by telnet command.
It means Max Transmit Unit for packet. The default
setting is 1442.
Routing Information Protocol is abbreviated as RIP
（RFC1058）specifying how routers exchange routing tables
information. Click Enable RIP for activating this function.
This group allows you to obtain an IP address automatically
41
Vigor2920 Series User's Guide