Draytek Vigor2920n User Manual page 52

After finishing all the settings here, please click OK to activate them.
D e t a i l s
D e t a i l s
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your ISP service providers. In most cases, a Cable service
provider will offer a fixed public IP. If you have a public subnet, you could assign an IP
address or many IP address to the WAN interface.
To use Static or Dynamic IP as the accessing protocol of the internet, please choose Static or
Dynamic IP mode from Internet Access menu. The following web page will be shown.
Vigor2920 Series User's Guide
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using.
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC Address
or specify another MAC address by typing on the boxes of
MAC Address for the router.
Specify a MAC Address – Type the MAC address for the
router manually.
P a g e f o r S t a t i c o r
P a g e f o r S t a t i c o r
D y n a m i c I P i n W A
D y n a m i c I P i n W A
40
N 1 / W A N 2
N 1 / W A N 2