Draytek Vigor2920n User Manual page 283

Mode
Security
WEP
Pre-shared Key
Choose the mode for WDS setting. Disable mode will not
invoke any WDS setting. Bridge mode is designed to fulfill the
first type of application. Repeater mode is for the second one.
There are three types for security, Disable, WEP and
Pre-shared key. The setting you choose here will make the
following WEP or Pre-shared key field valid or not. Choose one
of the types for the router.
Check this box to use the same key set in Security Settings
page. If you did not set any key in Security Settings page, this
check box will be dimmed.
Type – There are two types for you to choose. WPA and WPA2
are used for WDS devices (e.g., AP700). For example, if you
have a wireless AP and a Vigor2830n wireless router, you can
set the encryption mode as WPA or WPA2 to establish your
WDS system between AP and the router.
Key - Type 8 ~ 63 ASCII characters or 64 hexadecimal digits
leading by "0x".
271
Vigor2920 Series User's Guide