Draytek Vigor2920n User Manual page 132

Dest IP End
Dest Port Start
Dest Port End
Move UP/Move Down
Click Index 1 to access into the following page for configuring load-balance policy.
Enable
Protocol
Binding WAN interface
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Vigor2920 Series User's Guide
Displays the IP address for the end of the destination IP.
Displays the IP address for the start of the destination port.
Displays the IP address for the end of the destination port.
Use Up or Down link to move the order of the policy.
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for the
WAN interface.
Choose the WAN interface (WAN1 / WAN2 / WAN3) for
binding.
Auto failover to other WAN – Check this button to lead the
data passing through other WAN automatically when the
selected WAN interface is failover.
Type the source IP start for the specified WAN interface.
Type the source IP end for the specified WAN interface. If this
field is blank, it means that all the source IPs inside the LAN
will be passed through the WAN interface.
Type the destination IP start for the specified WAN interface.
Type the destination IP end for the specified WAN interface. If
this field is blank, it means that all the destination IPs will be
passed through the WAN interface.
120