Draytek Vigor2920n User Manual page 106

Password
Confirm Password
Home Folder
Access Rule
Before you click OK, you have to insert a USB storage disk into the USB interface of the
Vigor router. Otherwise, you cannot save the configuration.
Vigor2920 Series User's Guide
accessing into USB storage disk.
Note: "Admin" could not be typed here as username, for the
word is specified for accessing into web pages of Vigor router
only. Also, it is reserved for FTP firmware upgrade usage.
Note: FTP Passive mode is not supported by Vigor Router.
Please disable the mode on the FTP client.
Type the password for FTP/Samba users for accessing FTP
server. Later, you can open FTP client software and type the
password specified here for accessing into USB storage disk.
Type the password again to make confirmation.
It determines the folder for the client to access into.
The user can enter a directory name in this field. Then, after
clicking OK, the router will create the specific/new folder in
the USB storage disk. In addition, if the user types "/" here,
he/she can access into all of the disk folders and files in USB
storage disk.
Note: When write protect status for the USB storage disk is
ON, you cannot type any new folder name in this field. Only
"/" can be used in such case.
You can click to open the following dialog to add any new
folder which can be specified as the Home Folder.
It determines the authority for such profile. Any user, who uses
such profile for accessing into USB storage disk, must follow
the rule specified here.
File – Check the items (Read, Write and Delete) for such
profile.
Directory –Check the items (List, Create and Remove) for such
profile.
94