Change How Pip Video Displays - Polycom VVX 101 User Manual

Polycom VVX Business Media Phones User Guide
Your video image is displayed at the top-right of the screen in a picture-in-picture (PIP) video, as shown next.
The PIP is displayed on your Home screen and during video calls.
Picture-in-Picture video on the Home screen
When you're in a call with a person that has video-enabled, your video is displayed in the PIP, and the
person you're talking with (the far-side) is displayed in the Active Call screen.
Call window with PIP and far-side video
You can customize how and where you see your PIP video and the far-side video. For example, you can
swap the windows in which the video is displayed, or even start and stop the transmission of your video.
The following sections show you how to customize video on your phone.
Note: The way far-side video is displayed on your phone may vary
Depending on the phone or system that is sending video, black bars might appear on the top, bottom,
or sides of the video image. This occurs because the aspect ratio of the video received does not
match the display area on your phone, and the portions of the video that are not being received
display as black bars. If the received video matches your phone's display area, the received video fills
the screen. If black bars display, you can remove them by selecting cropped video screen mode (see
Change How Far-Side Video

Change How PIP Video Displays

You can update the way the PIP is displayed when you're in full screen mode, when you view the far-side,
or when you view your video on the full screen. You can change the following PIP settings:
● Local Camera View (Full Screen) Enables or disables the PIP from displaying when you view video
on the full screen. The default setting is Enabled.
Polycom, Inc.
Displays).
110