Miscellaneous Settings; Beeper Setting; Beep Volume - Yaesu FT-450D Operation Manual

Beep Volume

You may adjust the beep volume level via the Menu Item "BEEPVOL".
1. Press and hold the [ F ] button for one second to
enter the Menu mode. The "
pear on the display.
2. Rotate the [ DSP/SEL ] knob to select the menu
item "BEEPVOL".
3. Press the [ DSP/SEL ] knob to enable adjustment
of this menu item. The "
ing.
4. Rotate the [ DSP/SEL ] knob to set the desired beep
volume level (FIX 0 - FIX 100).
WARNING! Do not adjust the beep volume too
high. You may press the [METER/DIM] button to
sound a beep as you adjust the [ DSP/SEL ] knob.
If you wish to adjust the beep volume level in ac-
cordance with the [AF GAIN] knob, press the [ F ]
key to change the display to "LNK-XX" then rotate
the [ DSP/SEL ] knob to set the volume ratio of the
beep volume level for the receiving audio volume
level. Available selections are "LNK-50" ~ "LNK 0"
~ "LNK+50". When the "LNK 0" is selected, the
beep volume level is the same as receiving audio
volume level.
You may press the [RCL/HOME] button to reset
the beep volume level to the factory default.
5. Press the [ DSP/SEL ] knob. The "
turns to appear continuously.
6. Press and hold the [ F ] button for one second to
save the new setting and return to normal opera-
tion.
FT-450D O
PERATION
M
ISCELLANEOUS
B
EEPER
" icon will ap-
" icon will be blink-
" icon re-
M
ANUAL
S
ETTING
[ DSP/SEL ] knob
S
ETTINGS
[ RCL/HOME ] button
[ F ] button
[ METER/DIM ] button
Page 71